+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: Home automation training courses (https://www.kincony.com/forum/forumdisplay.php?fid=18)
+--- Thread: Lesson9 - integrate KC868-Server to home assistant by MQTT (/showthread.php?tid=1781)
RE: Lesson9 - integrate KC868-Server to home assistant by MQTT - admin - 01-19-2023
do you see the "Note" of network setting webpage, "Mqtt Broker Username" and "Mqtt Broker Password" need <10 letters, now yous is too long, just change it.
such as "Mqtt Broker Username" = "mqtt" "Mqtt Broker Password"= "123" i think will be ok.
RE: Lesson9 - integrate KC868-Server to home assistant by MQTT - Wojtek - 01-19-2023
It helped to create an additional person in home assistance, the new person has access to login, you need to set a short password and the same password and username can be used as the mqtt broker name in the Kincony server settings. thanks !
RE: Lesson9 - integrate KC868-Server to home assistant by MQTT - admin - 01-19-2023
you are welcome.
RE: Lesson9 - integrate KC868-Server to home assistant by MQTT - Mauscom - 02-28-2023
I have forgotten my server login and am not able to change mqtt settings. How do you reset the username and password?
RE: Lesson9 - integrate KC868-Server to home assistant by MQTT - admin - 03-01-2023
user: admin
password you can use: jingkong
RE: Lesson9 - integrate KC868-Server to home assistant by MQTT - ARSHAD - 04-10-2023
Hello Sir,
i have done MQTT setting as per training like (username and password). Now from ESPHome (HomeAssistant - phone app) status of output is off
but in Server light is showing ON
Trying to off but not working please hep - i have attached all photo of configuration.
RE: Lesson9 - integrate KC868-Server to home assistant by MQTT - admin - 04-11-2023
you are using KC868-server, so topic: ‘relay32/a76735003767977252b3c64d/state’ replace with ‘server/a76735003767977252b3c64d/state’
topic: ‘relay32/a76735003767977252b3c64d/set’ replace with ‘server/a76735003767977252b3c64d/set’
NOT "relay32".
RE: Lesson9 - integrate KC868-Server to home assistant by MQTT - ARSHAD - 04-11-2023
(04-11-2023, 12:06 AM)admin Wrote: you are using KC868-server, so topic: ‘relay32/a76735003767977252b3c64d/state’ replace with ‘server/a76735003767977252b3c64d/state’
topic: ‘relay32/a76735003767977252b3c64d/set’ replace with ‘server/a76735003767977252b3c64d/set’
NOT "relay32".
Example of config:-
mqtt:
switch:
- name: ‘output-1’
unique_id: output-1
state_topic: ‘server/a76735003767977252b3c64d/state’
command_topic: ‘server/a76735003767977252b3c64d/set’
payload_on: ‘{“relay1”:{“on”:1}}’
payload_off: ‘{“relay1”:{“on”:0}}’
value_template: ‘{{ value_json.relay1.on }}’
state_on: 1
state_off: 0
i have changed the configuration file for all the 16 output but not working -- Output Light status is showing "ON" - trying to make it "off" not working
RE: Lesson9 - integrate KC868-Server to home assistant by MQTT - admin - 04-11-2023
take a video send to whatsapp. and upload your configure.yaml file.
RE: Lesson9 - integrate KC868-Server to home assistant by MQTT - ARSHAD - 04-11-2023
(04-11-2023, 11:18 AM)admin Wrote: take a video send to whatsapp. and upload your configure.yaml file.
Hello Sir,
I have uploaded the config.yaml file - please check and shared video