+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A16 (https://www.kincony.com/forum/forumdisplay.php?fid=25)
+--- Thread: For a 16 firmware (/showthread.php?tid=2509)
RE: For a 16 firmware - admin - 03-11-2023
do you want KC868-A16 work as "MASTER" or "SLAVE" ?
just want to know A16 connect to what device? A16 read data from device? or device control A16?
RE: For a 16 firmware - reehanlambe - 03-12-2023
Read data from other modbus devices hvac alarm point temperature humidity thanks
RE: For a 16 firmware - admin - 03-12-2023
new "KCS" will let A16 work as "SLAVE" , controlled by third device, if you want A16 work as "MASTER", you need to write arduino code by yourself, because different RS485 device have different protocol.
RE: For a 16 firmware - reehanlambe - 03-12-2023
I need to read data point from hvac device how to read data how I define alarm points modbus address
To relay 1 to 16
I have data point list just want to know how to use in kcs
RE: For a 16 firmware - admin - 03-12-2023
i have said, "KCS" not support use by this way. A16's RS485 address can set by A16's config webpage.
RE: For a 16 firmware - reehanlambe - 06-01-2023
Hi sir thank for answering all questions
Just I request you to make a video for all in one board for hvac like temp humidity and compressor and child water system thank you very much ?
RE: For a 16 firmware - admin - 06-02-2023
do you want use KC868-AIO board work with home assistant?
RE: For a 16 firmware - reehanlambe - 06-02-2023
Yes sir I with using modbus rs485
RE: For a 16 firmware - admin - 06-02-2023
this is video tour, how to integrate modbus relay board to home assistant by ESPHome:
https://youtu.be/xmBWzVGpggo
RE: For a 16 firmware - reehanlambe - 06-09-2023
Hi sir
I try to install esp home assistant but this error comming dns problem pls help me to install dashboard and home assistant
Thank you very much