Help needed/wanted? - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1) +--- Forum: KC868-HxB series Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=2) +--- Thread: Help needed/wanted? (/showthread.php?tid=1730) |
RE: Help needed/wanted? - gay - 03-14-2022 (03-14-2022, 01:09 PM)admin Wrote: yes, confirmed, this week will send your package. Great, Many thanks. RE: Help needed/wanted? - admin - 03-14-2022 you are welcome. RE: Help needed/wanted? - masoos - 06-14-2022 Hi, I'm new here and at raspi: Saw the new cool Server. Question: Can I install on this raspi all together, own MQtt Broker, Home assisatnt server and node red togehter? (in order to have really a local solution without need of cloud...) I would love to use this server for Z-Wave, Zigbee and Sonoff devices to contol my whole house without and with Internet Thanks, Martin from Germany RE: Help needed/wanted? - admin - 06-14-2022 yes, you can install all software MQtt Broker, Home assisatnt and Node-Red on the KC868-Server, we have many video tour on our YouTube channel. if you want to use Zigbee and Z-Wave device, just connect with Z-Wave or Zigbee USB dongle with KC868-Server's USB port. RE: Help needed/wanted? - Scansat - 07-30-2022 Hello Unfortunately, it looks like I received a used product. (KC868-H32B) I can't access web settings. 192.168.1.200 (admin-admin) How can you delete all settings? (factory reset) THX RE: Help needed/wanted? - admin - 07-30-2022 e.) Hold on "Ethernet" mode button, when the [yellow and white and blue LED] all is ON, release it, then work mode in “TCP Server” and IP (192.168.1.200) by static mode; here is details: https://www.kincony.com/how-to-use-kc868-hxb-relay-controller.html i think you just need to use kincony scan device tool to find out IP address, your controller maybe in DHCP mode. RE: Help needed/wanted? - Scansat - 08-03-2022 OK. I managed to get into the web settings with the administrator password. -I can't add the device on the android application. I do everything according to the video. https://www.youtube.com/watch?v=e5sHsjcYz8c&list=PLIVTdhOwcFRy08W7DVCQUh3TumE7q0h6_&index=1&t=2s I'll make it this far-6:30 . Unfortunately, after saving, the hardware does not appear for me. (Conroller 32 Online) What do I do wrong? I have a UDP network connection. WAN setting. Not Wi-Fi. RE: Help needed/wanted? - admin - 08-03-2022 1. take a screen photo of your network setting webpage. 2. after added, you should go to "mine" - "device" - "Unclassified" , set a ROOM for controller. RE: Help needed/wanted? - Scansat - 08-03-2022 (08-03-2022, 03:25 AM)admin Wrote: 1. take a screen photo of your network setting webpage. Thanks. 1, I attached a photo 2, https://www.youtube.com/watch?v=yIVPCTmbKzg I created Floor and Room settings. -The yellow led lights up on the controller next to the power connector. -The red and blue LEDs light up next to the LAN connector. -I'm using a LAN. I can operate the device from a computer, but not from Android. RE: Help needed/wanted? - admin - 08-03-2022 I can operate the device from a computer? by which software? or just by webpage? |