+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-HxB series Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=2)
+--- Thread: home assistant RC 2022.6 mqtt config update for configuration.yaml (/showthread.php?tid=1998)
RE: home assistant RC 2022.6 mqtt config update for configuration.yaml - hjahend - 02-23-2024
Thank you, but I want to keep using ESPHome on the A16 board. Because that is working fine an is already configured to my needs.
Please advise howto for that automation-concept.
RE: home assistant RC 2022.6 mqtt config update for configuration.yaml - admin - 02-23-2024
if you want to use ESPHome, you can use MQTT config by ESPHome, here is details: https://esphome.io/components/mqtt.html
RE: home assistant RC 2022.6 mqtt config update for configuration.yaml - janami - 12-15-2024
Hello,
I can read the inputs, but I have a problem controlling the outputs – it’s not working. Where am I making a mistake?
RE: home assistant RC 2022.6 mqtt config update for configuration.yaml - admin - 12-16-2024
which kincony board model you are using?