Smart Home Automation Forum
"KCS" v2.2.2 firmware BIN file download - Printable Version

+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: "KCS" firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=40)
+--- Thread: "KCS" v2.2.2 firmware BIN file download (/showthread.php?tid=3791)

Pages: 1 2 3 4 5 6 7 8

RE: "KCS" v2.2.2 firmware BIN file download - Philadam - 06-19-2024

Thanks Looks like it is working now.

RE: "KCS" v2.2.2 firmware BIN file download - admin - 06-19-2024

now it can work with home assistant by MQTT?

RE: "KCS" v2.2.2 firmware BIN file download - Philadam - 06-19-2024

Yes it works with HA and mqtt

RE: "KCS" v2.2.2 firmware BIN file download - admin - 06-19-2024

ok

RE: "KCS" v2.2.2 firmware BIN file download - Ezequiel - 07-12-2024

(01-04-2024, 12:35 PM)tamibandia Wrote:
(01-03-2024, 12:48 PM)administración Wrote: KCS admite un GPIO por sensor. Si usa ESPHome, admite el uso de un GPIO para varios sensores DS18B20.

Pero esa característica podría ser muy útil. La hice yo mismo y, por eso, no puedo usar el firmware KCS, Sad que tiene muchas cosas interesantes integradas.

Si quieres, puedo enviarte el código que hice para que puedas integrarlo en tu firmware. Mi integración no agrega ningún retraso al tiempo de ciclo, porque usé el segundo núcleo del microprocesador y también tiene administración, mediante el código único DS10B20.

Podrias compartirlo? necesito lo mismo y me gustaria hacerlo con KCS Gracias!!!

RE: "KCS" v2.2.2 firmware BIN file download - Goga777 - 08-07-2024

[Image: sMCwtQGG]
KC868-A16
Получил посылку. Не могу прошить. Что я делаю не так?
Confused

RE: "KCS" v2.2.2 firmware BIN file download - Goga777 - 08-07-2024

I received the parcel. I can't flash it. What am I doing wrong?

[Image: 2024-08-07-184552.jpg]

RE: "KCS" v2.2.2 firmware BIN file download - admin - 08-07-2024

what board model you are using? take a photo how you wire.
do you have installed USB driver for your Windows OS? here is download link: https://www.kincony.com/download/CH341SER.zip
the LOG showed have problem with serial port.

RE: "KCS" v2.2.2 firmware BIN file download - Goga777 - 08-08-2024

I disconnected all USB devices from the laptop. Connected the board and everything was flashed. Thank you.

RE: "KCS" v2.2.2 firmware BIN file download - admin - 08-08-2024

ok