+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: DIY Project (https://www.kincony.com/forum/forumdisplay.php?fid=3)
+--- Thread: Is any way to link elecyric gate motor and wireless security alarm to use kincony app (/showthread.php?tid=1116)
Pages:
1
2
Is any way to link elecyric gate motor and wireless security alarm to use kincony app - ahmed - 11-14-2021
Is any way to link electrc gate motor and wireless security alarm to use kincony app?
The wirless security alarm is :- SL6 Response Wirefree Telecommunicating Alarm System 868 MHZ
And the electric gate motor is 433MHZ RF , i attached the specifications and details
RE: Is any way to link elecyric gate motor and wireless security alarm to use kincony app - admin - 11-14-2021
you can see this video, may be is your wanted. just short for relay controller's sensor input ports, then will send alarm message to your mobile phone.
RE: Is any way to link elecyric gate motor and wireless security alarm to use kincony app - ahmed - 11-15-2021
The gate motor is RF 433MHZ, is any way to learn to kincony and open, close the gate from the same app?
RE: Is any way to link elecyric gate motor and wireless security alarm to use kincony app - admin - 11-15-2021
do you gate motor receiver PCB board or controller have a "learn" function button?
RE: Is any way to link elecyric gate motor and wireless security alarm to use kincony app - ahmed - 11-15-2021
Yes, the remote control is 433 MHZ learn function button.
RE: Is any way to link elecyric gate motor and wireless security alarm to use kincony app - admin - 11-16-2021
ok, use KC868-G wireless gateway to send RF 433MHz signal. you can use kincony smart home app create a "RF" button, when press the "button" on phone will send a RF signal, then let your gate motor pcb board "learn" the signal to remember it.
RE: Is any way to link elecyric gate motor and wireless security alarm to use kincony app - ahmed - 11-17-2021
Where the KC868- G wirless will be located
Baring in mind the gate automation panel on the house fence outdoor .
RE: Is any way to link elecyric gate motor and wireless security alarm to use kincony app - admin - 11-17-2021
not far away from your gate receiver module. near by it. KC868-G only connect with a USB cable for DC5V power supply is ok.
RE: Is any way to link elecyric gate motor and wireless security alarm to use kincony app - ahmed - 11-19-2021
Not sure the best location of the KC-868-G
?
The gate receiver is close to gate on the fence.
All controllers will be in garden switchboard.
RE: Is any way to link elecyric gate motor and wireless security alarm to use kincony app - admin - 11-19-2021
let KC868-G distance with your receiver board <10 meter.