+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-Uair (https://www.kincony.com/forum/forumdisplay.php?fid=31)
+--- Thread: [arduino source code for KC868-Uair-8] RF 433MHz wireless remoter decode (/showthread.php?tid=1578)
[arduino source code for KC868-Uair-8] RF 433MHz wireless remoter decode - admin - 01-04-2022
#include <RCSwitch.h>
RCSwitch mySwitch = RCSwitch();
void setup() {
Serial.begin(9600);
mySwitch.enableReceive(digitalPinToInterrupt(13));
}
void loop() {
if (mySwitch.available()) {
Serial.print("Received ");
Serial.print( mySwitch.getReceivedValue() );
Serial.print(" / ");
Serial.print( mySwitch.getReceivedBitlength() );
Serial.print("bit ");
Serial.print("Protocol: ");
Serial.println( mySwitch.getReceivedProtocol() );
mySwitch.resetAvailable();
}
}
download arduino IDE source code file:
RF-receiver.zip (Size: 393 bytes / Downloads: 293)
Note: install "rcswitch" library online firstly.