+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-HxB series Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=2)
+--- Thread: KC868-A4 Serial Ports and Scl Sda ? and Voltage range of 4-20mA ports (/showthread.php?tid=1635)
KC868-A4 Serial Ports and Scl Sda ? and Voltage range of 4-20mA ports - gokhan - 01-06-2022
Does KC868-A4 model control card support to connect Nextion Screen by using Tx2 Rx2 of ESP32
or connect I2C LC by using SCL SDA ?
I looked for but I think KC868-A4 doesn't have SLC SDA and TX2 RX2 ports ? İf it has could you show us ?
Secondly I have 4-20mA sensor output and voltage of sensor terminals is 24V
what happens if I connect 4-20mA sensor output to KC868-A4 4-20mA ports
does the 24V of supply voltage of sensor damage the ports of KC868-A4 ?
RE: KC868-A4 Serial Ports and Scl Sda ? and Voltage range of 4-20mA ports - admin - 01-06-2022
1. KC868-A4 have a RS232 port, if you want to communication with Nextion screen by serial, you just need to add RS232-TTL level adapter. Nextion screen i think is 3.3V level.
2. use DC12V or 24V sensor all no problem, because you can connect with 4-20mA teminal, it just according to current, not by voltage. use DC24v will be let the cable long distance.