+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-HxB series Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=2)
+--- Thread: Chain KC868-H32B and KC868-H32L (/showthread.php?tid=1668)
Chain KC868-H32B and KC868-H32L - tdh - 01-26-2022
Hi,
I have both the KC868-H32B and KC868-H32L.
Is it possible to extend / chain the two controllers so i have 64 relay's?
And is it then also possible to control them over HTTP like :
http://192.168.1.10/sw_ctl.cgi?Relay64=ON
Thanks!!
RE: Chain KC868-H32B and KC868-H32L - admin - 01-26-2022
H32L not support http , only H32B support http and mqtt.
RE: Chain KC868-H32B and KC868-H32L - tdh - 01-26-2022
And is it possible to chain / extend the H32B with the H32L so we have 64 relays?
RE: Chain KC868-H32B and KC868-H32L - admin - 01-26-2022
can't connect second controller to first controller.
But you can just let every controller connect to your router by network cable, send command to different IP address.