+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A32/A32 Pro (https://www.kincony.com/forum/forumdisplay.php?fid=27)
+--- Thread: [Arduino IDE demo source code for KC868-A32]--#01-ADC_INOUT (/showthread.php?tid=1773)
[Arduino IDE demo source code for KC868-A32]--#01-ADC_INOUT - KinCony Support - 03-24-2022
Code:
#include "Arduino.h"
#define ANALOG_A1 39
#define ANALOG_A2 34
#define ANALOG_A3 36
#define ANALOG_A4 35
void setup()
{
Serial.begin(115200);
delay(1000);
pinMode(ANALOG_A1,INPUT);
pinMode(ANALOG_A2,INPUT);
pinMode(ANALOG_A3,INPUT);
pinMode(ANALOG_A4,INPUT);
}
void loop()
{
delay(500);
Serial.printf("Current Reading A1 on Pin(%d)=%d\n",ANALOG_A1,analogRead(ANALOG_A1));
Serial.printf("Current Reading A2 on Pin(%d)=%d\n",ANALOG_A2,analogRead(ANALOG_A2));
Serial.printf("Current Reading A1 on Pin(%d)=%d\n",ANALOG_A3,analogRead(ANALOG_A3));
Serial.printf("Current Reading A2 on Pin(%d)=%d\n",ANALOG_A4,analogRead(ANALOG_A4));
}