+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-HxB series Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=2)
+--- Thread: button switch module for KC868-Hx (/showthread.php?tid=1804)
button switch module for KC868-Hx - Dm81 - 04-04-2022
As I wrote in my other post, I connected the push button switch module to rs232 to the LAN converter, I would know if it is possible to change the push button switch module firmware to get a message every time I press and leave a contact from the input like in your video (https://www.kincony.com/momentary-latch-switch-or-push-button-for-smart-home-automation-diy.html)
If I press and hold a button I receive RELAY-KEY-255, X, 1,
If I release the button I receive RELAY-KEY-255, X, 0
do you think is possible?
thank you in advance
RE: button switch module for KC868-Hx - admin - 04-04-2022
switch terminal board designed by 8051 CPU, write by C program code. we can't change the firmware because many people is using. if you want to do this have you can try to modify the C code, we can send you the "switch terminal board" source code. you just change it , compile it and download to CPU by RS232.
RE: button switch module for KC868-Hx - Dm81 - 04-04-2022
(04-04-2022, 06:42 AM)admin Wrote: switch terminal board designed by 8051 CPU, write by C program code. we can't change the firmware because many people is using. if you want to do this have you can try to modify the C code, we can send you the "switch terminal board" source code. you just change it , compile it and download to CPU by RS232.
yes, please
I would appreciate it very much
RE: button switch module for KC868-Hx - admin - 04-04-2022
here is project source code, if you modify complete, you can upload share with other users when they want to use, thanks.
switch-terminal-board-source-code.zip (Size: 107.84 KB / Downloads: 239)
RE: button switch module for KC868-Hx - Dm81 - 04-04-2022
(04-04-2022, 08:10 AM)admin Wrote: here is project source code, if you modify complete, you can upload share with other users when they want to use, thanks.
if it will works, of sure, thx
RE: button switch module for KC868-Hx - admin - 04-04-2022
just modfiy a little code will realize the function you want.
RE: button switch module for KC868-Hx - Dm81 - 04-06-2022
(04-04-2022, 12:22 PM)admin Wrote: just modfiy a little code will realize the function you want.
I would but I need to ask help to a friend because I don't know C
RE: button switch module for KC868-Hx - admin - 04-06-2022
good luck.