+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-Server Raspberry Pi4 local server (https://www.kincony.com/forum/forumdisplay.php?fid=17)
+--- Thread: [Arduino IDE demo source code for KC868-SERVER]--#04-Key press code (/showthread.php?tid=1851)
[Arduino IDE demo source code for KC868-SERVER]--#04-Key press code - KinCony Support - 04-22-2022
Code:
void setup() {
Serial.begin(9600);
pinMode(0,INPUT);// Key S5 is connected to IO0 set IO0 to input mode
}
void loop() {
if(digitalRead(0)==LOW){
Serial.println("Key S5 Pressed!");
delay(100);
}
if(digitalRead(0)==HIGH){
Serial.println("Key S5 Not Pressed!");
delay(1000);
}
}