+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-HxB series Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=2)
+--- Thread: KC868-H32 +button switch module V4.43? (/showthread.php?tid=1882)
KC868-H32 +button switch module V4.43? - Mawram - 04-30-2022
Hi
I have KC868-H32 (2020) +button switch module for KC868-Hx .All worked perfect until i try use MQTT for HA ?
I update firmvare to 4.43 by USB-RS232. and now switch module doesnt work- all lights
What can i do now? what the last firmware to H32? .V4.43 works only with H3xB ?
Where i can find last firmware for H32
thanks for help
RE: KC868-H32 +button switch module V4.43? - admin - 04-30-2022
v4.43 only work for KC868-H32B, not for H32(old version). give me your email, i send you H32 firmware, you can download it.
RE: KC868-H32 +button switch module V4.43? - Mawram - 05-01-2022
(04-30-2022, 11:21 PM)admin Wrote: v4.43 only work for KC868-H32B, not for H32(old version). give me your email, i send you H32 firmware, you can download it.
mawram@wp.pl
thanks
(04-30-2022, 11:21 PM)admin Wrote: v4.43 only work for KC868-H32B, not for H32(old version). give me your email, i send you H32 firmware, you can download it.
My home's system 2x H32 ,2xH16, 2x switch button terminal (Hx old version)
I would like to use MQTT for feedback states in HA.
Do I have to replace all relay controllers with newer ones (H32B...or Server) , or can I upgrade the current system wanting to use MQTT for HA?
what the best solution? I use many wall switch connect by switch button terminal to H16-32 .I don't need wifi module. I use wire connection.
thanks for help
RE: KC868-H32 +button switch module V4.43? - admin - 05-02-2022
email have sent to you.
the best solution is use one KC868-Server add KC86H32BS+ KC868-E16.
so that your home assistant can install on the KC868-Server, KC868-H32BS for extend output, use E16 when relay is bad, it easy to replace and repaire, because E16's relay is removable.
old controller no new firmware for update for MQTT, because chip no memory space for update.
RE: KC868-H32 +button switch module V4.43? - jeroen91 - 12-10-2022
(05-02-2022, 12:36 AM)admin Wrote: email have sent to you.
the best solution is use one KC868-Server add KC86H32BS+ KC868-E16.
so that your home assistant can install on the KC868-Server, KC868-H32BS for extend output, use E16 when relay is bad, it easy to replace and repaire, because E16's relay is removable.
old controller no new firmware for update for MQTT, because chip no memory space for update.
can u please help me too? i have an old kc868 h32 with manual button module. now i would like to use it in homeassistant preference mqtt. is there a software update for the controller for this?
gr jeroen
controller: H868190900896
manual button: KC868-H8&32 Manual control Board REV1:1
RE: KC868-H32 +button switch module V4.43? - admin - 12-11-2022
if you are using KC868-H32,H32L,H32LW, these old version CPU not have enough memory for MQTT firmware.
MQTT only support by KC868-H32B,H32BS,H32B Pro.