+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A64 (https://www.kincony.com/forum/forumdisplay.php?fid=28)
+--- Thread: KC868-A64 ESP32 I/O pin define (/showthread.php?tid=1903)
KC868-A64 ESP32 I/O pin define - admin - 05-12-2022
#define ANALOG_A1 GPIO39
#define ANALOG_A2 GPIO34
#define ANALOG_A3 GPIO36
#define ANALOG_A4 GPIO35
IIC Bus-1:A
SDA-A:GPIO5
SCL-A:GPIO16
PCF8575:U143 (relay1-16): 100 100 = 0x24
PCF8575:U145 (relay17-32): 100 101 = 0x25
PCF8575:U147 (relay33-48): 100 001 = 0x21
PCF8575:U149 (relay49-64): 100 010 = 0x22
IIC Bus-2:B
SDA-B:GPIO15
SCL-B:GPIO4
PCF8575:U14 (DI1-16): 100 100 = 0x24
PCF8575:U31 (DI17-32): 100 101 = 0x25
PCF8575:U56 (DI33-48): 100 001 = 0x21
PCF8575:U57 (DI49-64): 100 010 = 0x22
-----------------
Ethernet (LAN8720) I/O define:
#define ETH_ADDR 0
#define ETH_POWER_PIN -1
#define ETH_MDC_PIN 23
#define ETH_MDIO_PIN 18
#define ETH_TYPE ETH_PHY_LAN8720
#define ETH_CLK_MODE ETH_CLOCK_GPIO17_OUT
--------------------
RS485:
RXD:GPIO13
TXD:GPIO14
Extend serial port (3.3v TTL level):
RXD:GPIO32
TXD:GPIO33