+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-AI (https://www.kincony.com/forum/forumdisplay.php?fid=29)
+--- Thread: [Arduino IDE demo source code for KC868-AI]--#05-KC868-AI_RS232_code (/showthread.php?tid=2022)
[Arduino IDE demo source code for KC868-AI]--#05-KC868-AI_RS232_code - KinCony Support - 07-06-2022
[Arduino IDE demo source code for KC868-AI]--#05-KC868-AI_RS232_code
Code:
void setup() {
// put your setup code here, to run once:
Serial1.begin(115200,SERIAL_8N1,33,32);
}
void loop() {
// put your main code here, to run repeatedly:
Serial1.print("RELAY-KEY-255,1,1");
delay(2000);
}