+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A8 (https://www.kincony.com/forum/forumdisplay.php?fid=23)
+--- Thread: Configure KC868-A8 in ESPHome (/showthread.php?tid=2024)
Configure KC868-A8 in ESPHome - fabuena - 07-06-2022
Hello,
¿How can I configured/flash my KC868-A8 in ESPHome (Home Assistant) for this sensors?
*Two Digital Inputs S3 and 54,
*Two Analog Inputs A1 and A2
*Two Temperature sensors Input S1and S2 can connect
DS18B20 Temperature sensor or DHT11 or DHT21 temperature and Humdity Sensor.
Does anyone have a complete KC868-A8 .yaml file to configure ESPHome?
Thankyou in advance
RE: Configure KC868-A8 in ESPHome - admin - 07-06-2022
actually every parts we already have some different config file by different video tour.
if you want all in one config file, we can make it for you.
RE: Configure KC868-A8 in ESPHome - fabuena - 07-06-2022
(07-06-2022, 01:17 PM)admin Wrote: actually every parts we already have some different config file by different video tour.really the only thing I want is to incorporate the pending sensors into the home assistant:
if you want all in one config file, we can make it for you
Digital inputs S4 and S5
Analog inputs A1 and A2
Temperature sensors S1 and S2
Two
RE: Configure KC868-A8 in ESPHome - admin - 07-06-2022
ok, when we have free time, make a config file for you, maybe need 2-3 days.
RE: Configure KC868-A8 in ESPHome - fabuena - 07-06-2022
(07-06-2022, 02:47 PM)admin Wrote: ok, when we have free time, make a config file for you, maybe need 2-3 days.
Thank you in advance!
RE: Configure KC868-A8 in ESPHome - admin - 07-07-2022
you can use this config file:
A8-esphome.txt (Size: 3.35 KB / Downloads: 835)
ds18b20 used pin14 in config file.
actually you can use 4 channel ports all use for DS18B20, just change GPIO number:
DS18B20/DHT11/DHT21/LED strip -1: 14
DS18B20/DHT11/DHT21/LED strip -2: 13
DS18B20/DHT11/DHT21/LED strip -2: 32
DS18B20/DHT11/DHT21/LED strip -2: 33
S3 and S4 is config by digital input.
RE: Configure KC868-A8 in ESPHome - fabuena - 07-07-2022
(07-07-2022, 06:06 AM)admin Wrote: you can use this config file:
ds18b20 used pin14 in config file.
actually you can use 4 channel ports all use for DS18B20, just change GPIO number:
DS18B20/DHT11/DHT21/LED strip -1: 14
DS18B20/DHT11/DHT21/LED strip -2: 13
DS18B20/DHT11/DHT21/LED strip -2: 32
DS18B20/DHT11/DHT21/LED strip -2: 33
S3 and S4 is config by digital input.
Thank you very much!
According to what the KC868 schematic indicates for the temperature, it would be pins 13, 14, 36 and 39?
I don't have any experiencie so... I am not sure!
RE: Configure KC868-A8 in ESPHome - admin - 07-07-2022
you can see this the newest version : V1.4 https://www.kincony.com/download/KC868-A8-PCBV1.4.pdf
RE: Configure KC868-A8 in ESPHome - fabuena - 07-07-2022
I need to update the firmware?
RE: Configure KC868-A8 in ESPHome - admin - 07-08-2022
not need, just different hardware version, you can see your A8 board PCB whether printed V1.4