+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-A series and Uair Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=6)
+--- Thread: KC868-AG ESP32 315/433Mhz or only 433Mhz? (/showthread.php?tid=2138)
KC868-AG ESP32 315/433Mhz or only 433Mhz? - greg - 08-21-2022
Hi Team, is the KC868-AG ESP32 both 315Mhz & 433Mhz? The Aliexpress listing says it's both 315Mhz & 433Mhz but I can't find any reference to 315Mhz in the documentation. Cheers!
RE: KC868-AG ESP32 315/433Mhz or only 433Mhz? - admin - 08-22-2022
Hello! KC868-AG use by 433MHz.
KC868-G use by 315M sender and 433M sender.
here are two different products.
RE: KC868-AG ESP32 315/433Mhz or only 433Mhz? - greg - 08-22-2022
(08-22-2022, 12:09 AM)admin Wrote: Hello! KC868-AG use by 433MHz.
KC868-G use by 315M sender and 433M sender.
here are two different products.
Thank you, can I run ESPHome on the KC868-G?
RE: KC868-AG ESP32 315/433Mhz or only 433Mhz? - admin - 08-22-2022
no, KC868-G made by STM32 CPU. if you want to use ESPhome, you should chose KC868-AG, that made by ESP32 module.
RE: KC868-AG ESP32 315/433Mhz or only 433Mhz? - greg - 08-22-2022
(08-22-2022, 01:13 AM)admin Wrote: no, KC868-G made by STM32 CPU. if you want to use ESPhome, you should chose KC868-AG, that made by ESP32 module.
Thank you. Are you developing an ESP32 with 315Mhz in the future?
RE: KC868-AG ESP32 315/433Mhz or only 433Mhz? - admin - 08-22-2022
if you want to use 315M, just replace the 433M wireless module with 315M is ok. it's easy.