+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: News (https://www.kincony.com/forum/forumdisplay.php?fid=5)
+--- Thread: KC868-A4 PCB updated V1.2.4 (/showthread.php?tid=2163)
KC868-A4 PCB updated V1.2.4 - admin - 08-24-2022
new pcb v1.2.4 of KC868-A4, replaced USB-C with MiniUSB port.
![[Image: KC868-A4_03.jpg]](https://www.kincony.com/images/KC868-A4/KC868-A4_03.jpg)
RE: KC868-A4 PCB updated V1.2.4 - Laxhult - 08-28-2022
Please make a guide how to use 18B20 in homekit and make input and outputs i same projekt for homekit.
Wish for that… /Mattias
RE: KC868-A4 PCB updated V1.2.4 - admin - 08-28-2022
ok, when have free time can make it.
RE: KC868-A4 PCB updated V1.2.4 - andrija123 - 08-31-2022
Please info how to set analog output 0-10V over tasmota for 868-A4 board.
RE: KC868-A4 PCB updated V1.2.4 - admin - 08-31-2022
https://tasmota.github.io/docs/Berry/#cpu-temperature-sensor
RE: KC868-A4 PCB updated V1.2.4 - admin - 09-02-2022
(08-28-2022, 10:05 PM)Laxhult Wrote: Please make a guide how to use 18B20 in homekit and make input and outputs i same projekt for homekit.
Wish for that… /Mattias
here is demo source code "Apple HomeKit with DS18B20 temperature" have updated:
https://www.kincony.com/forum/showthread.php?tid=2225
it can work directly in KC868-A4, also can use for other KC868-A series board.
RE: KC868-A4 PCB updated V1.2.4 - Kross Piter - 09-16-2022
Was looking for this one! Thanks
RE: KC868-A4 PCB updated V1.2.4 - admin - 09-16-2022
you are welcome.