kincony_kc-H868B_relay32B HomeAssistant Mqtt Not Working After 2022.12.0 Update - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1) +--- Forum: KC868-HxB series Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=2) +--- Thread: kincony_kc-H868B_relay32B HomeAssistant Mqtt Not Working After 2022.12.0 Update (/showthread.php?tid=2254)

kincony_kc-H868B_relay32B HomeAssistant Mqtt Not Working After 2022.12.0 Update - Shemi - 09-08-2022 Hi, I updated HOME ASSISTANT to the latest version and now I get an error message.  The controller is an H32B model, And the connection is via MQTT. I can't connect to the controller and nothing is responding, through the HOMEASSISTANT interface. Before the update I could activate all the relays and see the state of the inputs. The controller itself works and I can enter the settings through the WEB interface. This is the message I see in the HOME ASSISTANT interface: https://im.ge/i/Screenshot-2[img]Manually configured MQTT switch(s) found under platform key switch.[/img]022-09-08-15552800002.OkBDd9 I am attaching a picture of the settings: I tried to change the settings to the new format as shown in the instructions and that doesn't work either. I assume the problem stems from incorrect settings in the CONFIGURATION.YAML file. The format should probably be changed. I would love to get help please. Thanks in advance, Shemi Cohen RE: kincony_kc-H868B_relay32B HomeAssistant Mqtt Not Working After 2022.12.0 Update - admin - 09-08-2022 new home assistant have updated MQTT config. see this link: https://www.kincony.com/forum/showthread.php?tid=1998