+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-E8T (https://www.kincony.com/forum/forumdisplay.php?fid=36)
+--- Thread: KC868-E8T 4G module SMS command list (/showthread.php?tid=2361)
KC868-E8T 4G module SMS command list - admin - 10-23-2022
1. Set a password
Format: KC + old password + new password
Note: The initial default password is 0000, and the password is 4 digits
Such as sending SMS: kc0000new1234
Reply to SMS: new password is 1234
2. Restore default password
Press the GPIO0 button on the board for more than 5 seconds, the password will be restored to 0000
3. Set the administrator number
If the password is 1234
Send SMS: kc1234set13100000000
Reply to SMS: manager 13100000000 set ok
Up to 6 administrator numbers can be set
The password and administrator number are written into eprom, and they are still valid after power off and on again.
4. Clear the administrator number
If the password is 1234
Send SMS: kc1234clear13100000000
Reply to SMS: clear manager 13100000000 ok
5. Clear all administrator numbers
If the password is 1234
Send SMS: kc1234clearall
Reply to SMS: clear all manager ok
6. Turn on one relay
Send SMS: kc1234relay1on
Reply to SMS: relay 1 is ON
ID:1-8 represent 1-8 relays
7. Turn off one relay
Send SMS: kc1234relay1off
Reply to SMS: relay 1 is OFF
ID:1-8 represent 1-8 relays
8. Turn on all relays
Send SMS: kc1234allon
Reply to SMS: ALL relay are ON
9. Turn off all relays
Send SMS: kc1234alloff
Reply to SMS: ALL relay are OFF
10. Jog control one relay
Jog control means that relay is turned on first, and after 1 second, it will be automatically turned off.
Send SMS: kc1234inching1
Reply to SMS: relay 1 is inching control ok
ID:1-8 represent 1-8 relays
11. Read the current state of the relay
Send SMS: kc1234state
Reply to SMS: relay 1=ON 2=ON 3=OFF 4=ON 5=OFF 6=ON 7=ON