+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A4 (https://www.kincony.com/forum/forumdisplay.php?fid=21)
+--- Thread: Why my KC868 A4 after 2 days not working or stop working. (/showthread.php?tid=2364)
Why my KC868 A4 after 2 days not working or stop working. - abgran - 10-23-2022
Why my KC868 A4 after 2 days not working or stop working but the power led still on. It's must switch off the power then switch on the power it will work again. after 2 days it will stop working again.
RE: Why my KC868 A4 after 2 days not working or stop working. - admin - 10-23-2022
can you replace with another new DC12v power supply for a test.
RE: Why my KC868 A4 after 2 days not working or stop working. - abgran - 10-24-2022
(10-23-2022, 11:57 PM)admin Wrote: can you replace with another new DC12v power supply for a test.
Okay. Will try today & wait for another days if working then power supply problem.
RE: Why my KC868 A4 after 2 days not working or stop working. - admin - 10-24-2022
yes.
RE: Why my KC868 A4 after 2 days not working or stop working. - abgran - 11-01-2022
You were right. It's all about a power supply of 12v. It's enough power actually. TQ.
RE: Why my KC868 A4 after 2 days not working or stop working. - admin - 11-02-2022
use a high quality power supply is the most important, if from KinCony, we use high quality powre supply.