+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-HxB series Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=2)
+--- Thread: KC868-H8 update firmware (/showthread.php?tid=2392)
KC868-H8 update firmware - FeNiX - 11-09-2022
Hi
Can I use AT32F415RBT7 MCU Chip with my KC868-H8 board if I want to have MQTT support with new firmware in my board?
RE: KC868-H8 update firmware - admin - 11-09-2022
no, only KC868-H8B can update to MQTT, they are use different hardware design.
RE: KC868-H8 update firmware - FeNiX - 11-09-2022
Ok, can I use any platform for home automation, for example Home Assistant or other with web interface, with my KC868-H8
And can you send my the latest firmware for KC868-H8 (yermak.igor@gmail.com)? My current version - 1.598
RE: KC868-H8 update firmware - admin - 11-09-2022
home assistant forum have H32 demo config, control relay by home assistant is no problem, but input state is not very well, if without MQTT. not need to update your H8 firmware, just inegrate by TCP protocol.