+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-E16T (https://www.kincony.com/forum/forumdisplay.php?fid=35)
+--- Thread: KC868-E16T Factory Original Firmware for Tuya App (/showthread.php?tid=2421)
KC868-E16T Factory Original Firmware for Tuya App - admin - 11-30-2022
Here is Factory Original Firmware for KC868-E16T. You can use Tuya mobile phone application directly. it supprt remote control by internet and manual control buttons on board.
KC868-E16T_tuya.nodemcu-32s.zip (Size: 116.22 KB / Downloads: 307)
some people after downloaded ESPHome firmware for home assistant, if you want to use tuya app again, you can download the Factory Original Firmware for recovery.
about ESP flash tool download link and details see here : https://www.kincony.com/esp-module-flash-download-tools.html
need add 4 files,set the address like the picture
RE: KC868-E16T Factory Original Firmware for Tuya App - engmohades - 04-30-2023
Is it possible to use the kcs firmware system and the pre-existing Tuya application with kc868-E16T Or will I lose out on actually using the Tuya built-in with the KC868-E16T ?
RE: KC868-E16T Factory Original Firmware for Tuya App - admin - 04-30-2023
sorry, now not have "KCS" firmware for KC868-E16T, because it already have Tuya module on the PCB. use tuya module will support voice control by Alexa and Google home. if use "KCS" for tuya app, that will not support use voice control.
RE: KC868-E16T Factory Original Firmware for Tuya App - engmohades - 04-30-2023
Will this be considered in the future in a new update?
Currently the Tuya modules and ESPHOME with a homeassistant can be used in the time
RE: KC868-E16T Factory Original Firmware for Tuya App - admin - 04-30-2023
if not use voice control. this can be done by "KCS".
RE: KC868-E16T Factory Original Firmware for Tuya App - engmohades - 05-03-2023
Ok,
I will use kcs firmware integrat with home assistant
Can active tuya Application free or paied with KC868-E16T?
RE: KC868-E16T Factory Original Firmware for Tuya App - admin - 05-04-2023
if you download "KCS" firmware, your tuya wifi module will can't use. if you want to use home assistant, suggest use by ESPHome, but tuya wifi module will not supported.
RE: KC868-E16T Factory Original Firmware for Tuya App - engmohades - 05-08-2023
What is the better and more estability to integrate E16T with Homeassistant
By Esphome or KCS Firmware by mqtt?
RE: KC868-E16T Factory Original Firmware for Tuya App - admin - 05-08-2023
suggest use by ESPHome, because it work locally , without mqtt broker.
RE: KC868-E16T Factory Original Firmware for Tuya App - pauloosler - 05-22-2023
Hi! My Kincony KC868 E16T is dead after I tried to instal
the WEB Server ETH. I tried to restore the factory firmware to control the KC868 E16T with Tuya but the reset and configure buttons are not working. Could you help me to solve this issue?
