+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-HxB series Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=2)
+--- Thread: KC868-HA ESP32 arduino demo code work with KC868-A8S (/showthread.php?tid=2437)
KC868-HA ESP32 arduino demo code work with KC868-A8S - admin - 12-12-2022
This is arduino demo code for KC868-A8S board, you can use for any KC868-A series board just have RS485 interface.
The function is press 6 digital input trigger relay output and feedback relay state to switch panel's LEDs. When press the switch panel buttons, will control KC868-A8S relay output.
arduino code download link:
KC868-HA-A8S-Demo.zip (Size: 1.79 KB / Downloads: 405)
RE: KC868-HA ESP32 arduino demo code work with KC868-A8S - glock4101 - 12-13-2022
GOOD!!!! Very Good!
RE: KC868-HA ESP32 arduino demo code work with KC868-A8S - admin - 12-13-2022
you are welcome.
RE: KC868-HA ESP32 arduino demo code work with KC868-A8S - AshS - 02-27-2025
Do you have an example ESPHome config to use with this?
RE: KC868-HA ESP32 arduino demo code work with KC868-A8S - admin - 02-27-2025
sure, check at here: https://github.com/hzkincony/esphome-kc868-ha
also have video tour about it: https://youtu.be/S679QX6Hc6I