+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: Schematic and diagram (https://www.kincony.com/forum/forumdisplay.php?fid=33)
+--- Thread: KC868-AP dimmer work with RGBW LED strip (/showthread.php?tid=2492)
KC868-AP dimmer work with RGBW LED strip - admin - 01-04-2023
here is KC868-AP dimmer controller work with DC12V/24V LED strip and wall switch panel.
RE: KC868-AP dimmer work with RGBW LED strip - mahafree - 02-04-2023
Is it possible to get an 0-10v output from this board instead of PWM?
RE: KC868-AP dimmer work with RGBW LED strip - admin - 02-04-2023
sure, KC868-AP use for output 0-10v
RE: KC868-AP dimmer work with RGBW LED strip - mahafree - 02-04-2023
Is it possible to provide an example config to output 0-10v?
I'm using ESPhome and home assistant.
RE: KC868-AP dimmer work with RGBW LED strip - admin - 02-04-2023
here is config yaml file for ESPHome:
https://www.kincony.com/forum/showthread.php?tid=2476
RE: KC868-AP dimmer work with RGBW LED strip - mahafree - 02-04-2023
I'm currently using that config.
Every channel outputs a PWM signal.
RE: KC868-AP dimmer work with RGBW LED strip - mahafree - 02-04-2023
I'm trying to do this but with the KC868-AP.
RE: KC868-AP dimmer work with RGBW LED strip - admin - 02-05-2023
sure, just KC868-AP already have led driver circuit on the PCB, KC868-D16 need to add extend led driver.
RE: KC868-AP dimmer work with RGBW LED strip - mahafree - 02-05-2023
This my exact setup.
Is there some parameter I need to change to change the current PWM signal?
RE: KC868-AP dimmer work with RGBW LED strip - admin - 02-05-2023
if you want output dc0-10v, you need to use 10v power supply.