HxB - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1) +--- Forum: KC868-HxB series Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=2) +--- Thread: HxB (/showthread.php?tid=2545)

HxB - Yazaww - 01-30-2023 Hello, I have a question about HxB series, about the inputs , like H32B has 6 inputs, what can i do with them? Lets say pir sensor connected on input 1 sowhat does it do? And how to program it? Liek can i make input 1(pir sensor) control output relay 1-2-3-4 to be ON? If yes please explain how by schematic if possible please , or the inputs are only for information? Also if yes please explain how! Thanks RE: HxB - admin - 01-30-2023 H32B have 6 digital input use for dry contact sensor, just short for trigger. you can use "kincony smart home" app to set "scene" mode, then use INPUT to trigger scene mode or send alarm message.  such as : 1. create scene mode for relay ON relay1,2,3,4 video tour: https://www.youtube.com/watch?v=XzfLEUbYxI0&list=PLQUWhE_6LeOTayjN76adGk9A9qrdS094R&index=4 2. set INPUT trigger scene mode you have created.   video tour: https://www.youtube.com/watch?v=-JuWCZC39rY&list=PLQUWhE_6LeOTayjN76adGk9A9qrdS094R&index=6&t=5s 3. maybe you want send customsize alarm message, such as "some one is incoming!!!" to user mobile phone. every INPUT channel have two pin, just short them for >1 second will be trigger.