+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: DIY Project (https://www.kincony.com/forum/forumdisplay.php?fid=3)
+--- Thread: lease help me choose the materials required for the building (/showthread.php?tid=2612)
lease help me choose the materials required for the building - engmohades - 02-27-2023
Please help me choose the materials required for the building consisting of two floors
first floor
1- Lighting circuits 51
2- ventilation circuits 4
3- Air conditioner circuit 10
4- The number of motion sensors is 10
second floor
1- Lighting circuits 54
2- The number of curtains is 14 with 28 circles
3 - ventilation circuits 3
4 - Air conditioner circuit 10
5- Heater circuits 3
6- The number of motion sensors is 10
I will use HOMEASSISTANT and want use Switch contains a feedback lamp
RE: lease help me choose the materials required for the building - admin - 02-28-2023
these products suitable for you.
KC868-H32BS: use for lighting, ventilation circuits
KC868-E16v2: extend relay module
DC contactor: for large current load, such as Air conditioner
KC868-AI: it's INPUT module, use for you motion sensor
switch panel: chose LED feedback by +12v level
RE: lease help me choose the materials required for the building - engmohades - 02-28-2023
And what about the curtains?
When we press the switch, the curtain works, and when we lift the pressure on the switch, the curtain stops
And what about power supply for all materials
Possible purchase link for the devices you mentioned
RE: lease help me choose the materials required for the building - admin - 02-28-2023
controller have "interlock" function for curtain.
if you want "When we press the switch, the curtain works, and when we lift the pressure on the switch, the curtain stops" , you can chose KC868-A32 instead of KC868-H32BS, because the "KCS" firmware have this function.
these products all in our official store: https://kincony.aliexpress.com/store/1100463977