+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: News (https://www.kincony.com/forum/forumdisplay.php?fid=5)
+--- Thread: KC868-H32B V4.20 new firmware update (/showthread.php?tid=262)
Pages:
1
2
KC868-H32B V4.20 new firmware update - admin - 04-15-2021
improvement:
1. Improve the stability of anti-interference, if ethernet line failure by interference , now will automatic restart ethernet chip.
KC868-H32B V4.20 firmware download:
download the ZIP file , unzip update the bin file for KC868-H32B relay controller by USB-RS232 cable.
Relay32_V420_210416.zip (Size: 41.53 KB / Downloads: 402)
RE: KC868-H32B V4.20 new firmware update - wetterliese - 04-19-2021
Hello, I bought the Smart Controller H32bb21010238 in a bundle with KC868-Hx smart controller by RS232 port. I am very satisfied now I wanted to upgrade to firmware V.4.13 to 4.20 and it didn't work. Unfortunately, the controller is now only after restart reachable in the network. Can you help me? :-)
RE: KC868-H32B V4.20 new firmware update - admin - 04-19-2021
what's your means? can you take a video?
RE: KC868-H32B V4.20 new firmware update - wetterliese - 04-19-2021
I update with bootlader and Serial V.4.20 after run and reset it stays with V.4.13
RE: KC868-H32B V4.20 new firmware update - admin - 04-19-2021
do you have download the zip file directly? or you have unzip to BIN file to download?
RE: KC868-H32B V4.20 new firmware update - wetterliese - 04-19-2021
I have unzip zip file and uploaded the "Relay32_V420_210414.bin" with bootlader serial at the com port. ---- Download ------ Run ---- wait ---- Restart.
Version no. remains V.4.13
Is the version jump too high?
Sorry, I'm writing with a translator :-)
RE: KC868-H32B V4.20 new firmware update - admin - 04-20-2021
take a photo of your controller. I think you are using KC868-H32L, not KC868-H32B. you have write the wrong firmware to it, so can't work now.
RE: KC868-H32B V4.20 new firmware update - wetterliese - 04-20-2021
(04-20-2021, 12:33 AM)admin Wrote: take a photo of your controller. I think you are using KC868-H32L, not KC868-H32B. you have write the wrong firmware to it, so can't work now.
RE: KC868-H32B V4.20 new firmware update - admin - 04-20-2021
add technical support whatsapp number: +86-13336170682 user teamviewer remote control your PC to help you.
RE: KC868-H32B V4.20 new firmware update - wetterliese - 04-25-2021
(04-20-2021, 05:49 AM)admin Wrote: add technical support whatsapp number: +86-13336170682 user teamviewer remote control your PC to help you.solved.
reset firmware
update 4.01 (Serial)
separate router 192.168.1.1 advertise with cable
update 4.20 (Serial)
search for KC868-Eth-xxxxx
LAN connection 192.168.xxx
Set mqtt
Install the iobroker server
node red
and everything is ok: - =]
Now I can use the controler with buttons, RC, Vis in my own cloud.
thank you for your support