+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-AP / ADR (https://www.kincony.com/forum/forumdisplay.php?fid=38)
+--- Thread: KC868-AP (/showthread.php?tid=2654)
KC868-AP - eligijus - 03-05-2023
hi, maybe you can upload firmware bin file with esp KC868-AP
RE: KC868-AP - admin - 03-06-2023
for "KCS" firmware?
RE: KC868-AP - eligijus - 03-06-2023
Not necessarily, the old version is also suitable, you can upload some firmware, because I can't find any information with this board.
RE: KC868-AP - admin - 03-06-2023
developing new firmware for KC868-AP now, when completed, we will upload here and YouTube channel.
RE: KC868-AP - eligijus - 04-17-2023
hi when are you planning to release the firmware? I'm really looking forward to it because dbr I can't turn on the lights in my house?
RE: KC868-AP - admin - 04-18-2023
"KCS" firmware for KC868-AP will release in furture. now what problem with you? do you use esphome?
RE: KC868-AP - eligijus - 04-18-2023
I use the home assistant and I was a little interested in how to sign up for the esp home assistant, but I don't know how to program the kc 868-ap board, because I'm not a programmer. Maybe you could upload some instructions on how to start the board with home assistant.
RE: KC868-AP - admin - 04-18-2023
you can integrate KC868-AP to home assistasnt by ESPHome, it's very easy. here is config file content:
https://www.kincony.com/forum/showthread.php?tid=2477
RE: KC868-AP - eligijus - 04-24-2023
(04-18-2023, 10:51 PM)admin Wrote: you can integrate KC868-AP to home assistasnt by ESPHome, it's very easy. here is config file content:
https://www.kincony.com/forum/showthread.php?tid=2477
Hello, I wrote esp32 and started the board with home assistant, but the input switches do not work for me. After that, I need all input 16 channels to work separately and I do not promise to control the rgbw band. It's just that I have 16 individual dimmer switches in groups that need 1-10v control and to work with switches. Maybe you can edit the program to work and upload the corrected file
RE: KC868-AP - admin - 04-25-2023
digital input can't use?
your LOG photo, there is error of PCF8574, maybe have set wrong address, please check.