+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-HxB series Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=2)
+--- Thread: MQTT Firmware for KC868-H4 and H8 (/showthread.php?tid=266)
MQTT Firmware for KC868-H4 and H8 - Ramirez22 - 04-25-2021
Hello,
Long time ago, I develop Domoticz plugin with scrutating loop for inputs (the ALARM function isn't able to detect push button action) (Here)
Now, I want to change and use Home Assistant.
I read on forum that Kincony card can work with MQTT and I think that will help me a lot to avoid develop another plugin.
My relay interfaces are H8 and H4, rev 1.1.
I more recently bought a ST-LINK for upgrade firmware.
Is it possible to have confirmation that my interfaces can work with MQTT and in this case, have the firmware please ?
Many thanks for your help (and sorry if my English is not perfect : I'm French
)Regards
RE: MQTT Firmware for KC868-H4 and H8 - admin - 04-26-2021
now KC868-H32B and KC868-COLB already have new firmware support MQTT. But unfortunately, only "B" series product can support MQTT, because we have try ,but old version have not enough hardware resource to support MQTT function. But if you want to replace with your old controller with new version, we have discount for old user, you can contact with online store seller.