+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-AM (https://www.kincony.com/forum/forumdisplay.php?fid=45)
+--- Thread: KC868-AM configure yaml for ESPhome (/showthread.php?tid=2694)
KC868-AM configure yaml for ESPhome - admin - 03-16-2023
esphome:
name: am
esp32:
board: esp32dev
framework:
type: arduino
# Enable logging
logger:
# Example configuration entry
ethernet:
type: LAN8720
mdc_pin: GPIO23
mdio_pin: GPIO18
clk_mode: GPIO17_OUT
phy_addr: 0
switch:
- platform: gpio
name: "am-light1"
pin: 15
inverted: False
ESPHome_KC868-AM.txt (Size: 340 bytes / Downloads: 265)
RE: KC868-AM configure yaml for ESPhome - flatulentflamingo - 03-16-2023
Exciting. Now we have datasheets, esphome example config, pictures. Looking forward to having this available for order.
RE: KC868-AM configure yaml for ESPhome - admin - 03-16-2023
next week will upload to our online store begin sell.