+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-AI (https://www.kincony.com/forum/forumdisplay.php?fid=29)
+--- Thread: TCP Protocol (/showthread.php?tid=2780)
TCP Protocol - celloza - 04-11-2023
Hi
(Running KCS1.0.24, with TCP Server enabled)
Trying to read the state of the inputs on a KC868-AI via C# with TCP. I've found this article (https://www.kincony.com/smart-controller-development-protocol.html) but I'm not getting the data they describe.
Whenever I pull digital input 1 to 9 to ground, I read 17 from the socket. Whenever I pull digital input 10 through 48 to ground, I read 18 from the socket.
What is the protocol for TCP on KC868-AI?
RE: TCP Protocol - admin - 04-13-2023
we will test it, then feedback to you.
RE: TCP Protocol - admin - 04-17-2023
we will update it later.