+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A64 (https://www.kincony.com/forum/forumdisplay.php?fid=28)
+--- Thread: 24v input voltage? (/showthread.php?tid=2783)
24v input voltage? - tatu - 04-12-2023
Hi!
Will this board support 24v input voltage? Item description page says 12V/24V, board marked only 12V? REV: 1.3
Thanks.
RE: 24v input voltage? - admin - 04-13-2023
yes, it support 12v or 24v. do you want use power supply by DC 24v, or want OUTPUT 24v voltage?
RE: 24v input voltage? - tatu - 04-13-2023
(04-13-2023, 12:12 AM)admin Wrote: yes, it support 12v or 24v. do you want use power supply by DC 24v, or want OUTPUT 24v voltage?
24V power supply.
RE: 24v input voltage? - admin - 04-13-2023
ok, it's no problem. use for 12v--24v dc.
RE: 24v input voltage? - tofi93 - 06-24-2024
And is it possible to use the same 24VDC power supply for both the A64 and the outputs?
RE: 24v input voltage? - admin - 06-25-2024
sure, no problem.
RE: 24v input voltage? - tofi93 - 07-19-2024
I tested the A64 with 24VDC, but it shows no signs of life. It works with 12V. What could be the problem?
RE: 24v input voltage? - admin - 07-19-2024
take a whole photo, how you wire.
RE: 24v input voltage? - tofi93 - 07-20-2024
I am very sorry, it was my mistake. One of the cable connectors had a contact issue. As I was about to take the photo, I found and replaced it, and now it works perfectly.
RE: 24v input voltage? - admin - 07-20-2024
ok