+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-M16 / M1 / MB / M30 (https://www.kincony.com/forum/forumdisplay.php?fid=50)
+--- Thread: [Arduino source code for KC868-M16]-02 -ADC_code (/showthread.php?tid=2877)
[Arduino source code for KC868-M16]-02 -ADC_code - KinCony Support - 05-06-2023
[Arduino source code for KC868-M16]-02 -ADC_code
Code:
/*KC868-M16 Read A1 A2 A4 input*/
#include "Arduino.h"
#include "PCF8574.h"
#define ANALOG_A1 36
#define ANALOG_A2 34
#define ANALOG_A4 39
void setup()
{
Serial.begin(115200);
pinMode(ANALOG_A1,INPUT);
pinMode(ANALOG_A2,INPUT);
pinMode(ANALOG_A4,INPUT);
}
void loop()
{
if(analogRead(ANALOG_A1)!=0){
Serial.printf("Current Reading A1 on Pin(%d)=%d\n",ANALOG_A1,analogRead(ANALOG_A1));
}
if(analogRead(ANALOG_A2)!=0){
Serial.printf("Current Reading A2 on Pin(%d)=%d\n",ANALOG_A2,analogRead(ANALOG_A2));
}
if(analogRead(ANALOG_A4)!=0){
Serial.printf("Current Reading A4 on Pin(%d)=%d\n",ANALOG_A4,analogRead(ANALOG_A4));
}
delay(100);
}