+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-1U (https://www.kincony.com/forum/forumdisplay.php?fid=52)
+--- Thread: [Arduino source code for KC868-1U]-04_IR_send_code (/showthread.php?tid=3007)
[Arduino source code for KC868-1U]-04_IR_send_code - KinCony Support - 06-21-2023
[Arduino source code for KC868-1U]-04_IR_send_code
Code:
/*if download key pressed send IR signal*/
#include <IRremote.h>
IRsend irsend(5);
uint8_t sRepeats = 0;
void setup() {
Serial.begin(115200);
pinMode(0,INPUT);
IrSender.begin(5,0);
IrSender.enableIROut(38);
}
void loop() {
Serial.println("Turn on LED");
irsend.sendNECRaw(0xF807FF00, sRepeats); // 0xF807FF00 is the raw_code of led on
delay(1000);
Serial.println("Turn off LED");
irsend.sendNECRaw(0xF906FF00, sRepeats); // 0xF906FF00 is the raw_code of led Off
}