+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: News (https://www.kincony.com/forum/forumdisplay.php?fid=5)
+--- Thread: KC868-M16v2 iot ESP32 power meter board released (/showthread.php?tid=3108)
Pages:
1
2
KC868-M16v2 iot ESP32 power meter board released - admin - 07-25-2023
We have designed KC868-M16v2 new version (ESP32 16 Channel CT Clamp Energy Monitor) for home automation DIYer. it can easy integrate to home assistant by ESPHome. the hardware have 16CH CT Clamp sensor INPUT ports + 3CH ZMPT101B voltage sensor + SHT30 temperature & humidity sensor + Ethernet POE+ WiFi + Bluetooth + DS3231 RTC module + SSD1306 I2C LCD display + SD card.
![[Image: KC868-M16v2-1_01.jpg]](https://www.kincony.com/images/KC868-M16/v2/KC868-M16v2-1_01.jpg)
![[Image: KC868-M16v2-1_02.jpg]](https://www.kincony.com/images/KC868-M16/v2/KC868-M16v2-1_02.jpg)
![[Image: KC868-M16v2-1_03.jpg]](https://www.kincony.com/images/KC868-M16/v2/KC868-M16v2-1_03.jpg)
RE: KC868-M16v2 iot ESP32 power meter board released - Mosfet3 - 01-07-2024
Hi,
I interested in this product, but I want to ask about Power Factor correction. Is it realized, or just calculates power by formula P=U*I ??? Is it possible to assign clampts to different voltage inputs? Asking because if i have 3 pahase input, I need to assign current consumption to used input.
RE: KC868-M16v2 iot ESP32 power meter board released - admin - 01-07-2024
Power Factor need calculate by formula.
M16v2 have 3 channel voltage detect port, so it can monitor 3 phase power line, A, B, C. it's ok for you.
RE: KC868-M16v2 iot ESP32 power meter board released - Mosfet3 - 01-07-2024
Question is: Is it possible to set CH1 current to B voltage? or Ch2 to A voltage, hope you understand
RE: KC868-M16v2 iot ESP32 power meter board released - admin - 01-07-2024
it just set by ESPHome, not MUST CH1 current need with X CH voltage
RE: KC868-M16v2 iot ESP32 power meter board released - Mosfet3 - 01-07-2024
Ok, so only thing that missing on this device is power factor correction
RE: KC868-M16v2 iot ESP32 power meter board released - admin - 01-07-2024
maybe M30 suitable for you. here is details: https://www.kincony.com/esp32-energy-monitor-board.html
RE: KC868-M16v2 iot ESP32 power meter board released - Mosfet3 - 01-09-2024
M30 have power factor corrections?
RE: KC868-M16v2 iot ESP32 power meter board released - admin - 01-09-2024
no,it also need calculated by software.
RE: KC868-M16v2 iot ESP32 power meter board released - Mosfet3 - 01-09-2024
So calculations not integrated to your firmware?