+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: Schematic and diagram (https://www.kincony.com/forum/forumdisplay.php?fid=33)
+--- Thread: KC868-A8S MQTT Setup (/showthread.php?tid=3156)
KC868-A8S MQTT Setup - saun2000 - 08-16-2023
Can you please help me with MQTT setup for the KC868-A8S board? It's already configured but I still cannot operate from Home Assistant. I believe it UID issue.
Thank you.
RE: KC868-A8S MQTT Setup - admin - 08-16-2023
take a photo of your config webpage.
RE: KC868-A8S MQTT Setup - saun2000 - 08-17-2023
(08-16-2023, 12:48 PM)admin Wrote: take a photo of your config webpage.
I attached two photos
Thank you.
RE: KC868-A8S MQTT Setup - admin - 08-18-2023
here is MQTT procotol for KC868-A series board: https://www.kincony.com/forum/showthread.php?tid=3105
you need as this format:
Command topic: KC868_A8S/B48A0A404664/SET
State topic: KC868_A8S/B48A0A404664/STATE
B48A0A404664 replace with your own serial number (you can see it on your A8S board config webpage -- “home page”)