KC868-A16 NC outputs - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1) +--- Forum: KC868-A series and Uair Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=6) +--- Thread: KC868-A16 NC outputs (/showthread.php?tid=3203)

KC868-A16 NC outputs - Karle - 08-26-2023 Hello, I would need two NC outputs on the relays. Is that possible with the KC868-A16 ? Or are they all open when the mosfets are without power ? Or do I have to take a board with "real" relays on it (like the A16S or 2 x the A8) ? Greets & thank you  Karl RE: KC868-A16 NC outputs - admin - 08-26-2023 A16 use by MOSFET, if you want Normal Close, you can chose KC868-A16S: https://www.kincony.com/16-channel-esp32-4g-relay-board.html