Info about RS485 switch panel - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1) +--- Forum: News (https://www.kincony.com/forum/forumdisplay.php?fid=5) +--- Thread: Info about RS485 switch panel (/showthread.php?tid=3423) |
Info about RS485 switch panel - ahmedwizza1 - 10-25-2023 Hello engineer I want to ask about the RS485 switch panel KC868-HA - must connect power for all wall panels separated or can make one lope as KNX - When yes one lope. how many can connect in one lope to avoid problems with less power? What is the cable size can enough - Also, RS485 cable can also make it one lope? when yes how many in one lope - what type of cable is suitable and also the size RE: Info about RS485 switch panel - admin - 10-26-2023 - must connect power for all wall panels separated or can make one lope as KNX >> you can lope by one bus, all dc12v you can paralleling conenct together. - When yes one lope. how many can connect in one lope to avoid problems with less power? What is the cable size can enough >> it according to your power supply amp, every KC868-HA just mA level current. bus line use CAT5 network cable is ok. - Also, RS485 cable can also make it one lope? when yes how many in one lope >> yes, RS485 cable can do it. it's RS485 bus. one bus support MAX 22pcs KC868-HA - what type of cable is suitable and also the size >> CAT5 cable. |