+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: "KCS" firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=40)
+--- Thread: "KCS" v1.0.27 firmware for KC868-A64 A128 (/showthread.php?tid=3504)
"KCS" v1.0.27 firmware for KC868-A64 A128 - admin - 11-11-2023
because KCS v2 for KC868-A64 and KC868-A128 sometimes not very stable, not enough memory.
we suggest use this special firmware KCS v1.0.27 for KC868-A64 and KC868-A128.
improvement:
support timer set delay value from (1-65535), before version is (1-255).
RE: "KCS" v1.0.27 firmware for KC868-A64 A128 - Regis - 11-15-2023
I confirm my problem is fixed with V1.0.27 : connexion with ESP HOME is ok . thank you to support for his help. Joined my .yaml config
my yaml configuration that works
RE: "KCS" v1.0.27 firmware for KC868-A64 A128 - admin - 11-15-2023
ok, good.
RE: "KCS" v1.0.27 firmware for KC868-A64 A128 - Regis - 01-19-2024
Hi,
Is the problem of memory on firmware V2 on KC868--A64 fixed ? Is it possible to use it ?
Best regards
RE: "KCS" v1.0.27 firmware for KC868-A64 A128 - admin - 01-20-2024
we suggest to use v1.0.27 for A64 and A128.
if you not use tuya app, you can download KCS v2 firmware for A64. because tuya app will cost many memory.
RE: "KCS" v1.0.27 firmware for KC868-A64 A128 - saleem - 03-01-2024
There is no IFTTT in this version and the input setting for v2+ is limited to Reverse Level only.
RE: "KCS" v1.0.27 firmware for KC868-A64 A128 - admin - 03-02-2024
yes, because IFTTT not enough memory for A64 and A128.
RE: "KCS" v1.0.27 firmware for KC868-A64 A128 - kkabuu - 03-02-2024
Hello. how can I use this {"KCS" v1.0.27 firmware for KC868-A64 A128} at the same time with home assistant.
I want those trunks from KCS to continue to be accessed from A128
RE: "KCS" v1.0.27 firmware for KC868-A64 A128 - admin - 03-03-2024
download KCS v1.0.27 to A128, enable MQTT, use MQTT integrate to home assistant.