KC868-COLB V1.9 new firmware update - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1) +--- Forum: News (https://www.kincony.com/forum/forumdisplay.php?fid=5) +--- Thread: KC868-COLB V1.9 new firmware update (/showthread.php?tid=364) |
KC868-COLB V1.9 new firmware update - admin - 08-04-2021 improvement: 1. fixed work with some router maybe have DHCP problem. 2. add the "loop" mode for IFTTT "THEN" command. Now you can set times=255 will alway running the "THEN" command, never stop. KC868-COLB V1.9 firmware download: AD_COLB_V1_1_9_210803.zip (Size: 41.58 KB / Downloads: 327) download the ZIP file , unzip update the bin file for KC868-COLB logical controller. RE: KC868-COLB V1.9 new firmware update - papakigr - 08-16-2021 Is there a way to flash the firmware through the web interface OTA? RE: KC868-COLB V1.9 new firmware update - admin - 08-16-2021 Now only by RS232 cable, maybe in furture we will improve it. RE: KC868-COLB V1.9 new firmware update - itzek - 10-30-2021 I updated the firmware of my COLB to V1.9 and I can't login the http page via ethernet after this. I used admin/admin ,I used admin and null in password , and I use admin and the last password I use I try to press the ethernet bottom for 5 sec like in the other post I see (KC868-COLB Password Error After Firmware Update (kincony.com) and always shows "user or password error!" message. How can I proceed to fix this? RE: KC868-COLB V1.9 new firmware update - admin - 10-31-2021 after update, first time , you can use user name: admin password: jingkong to login, then you change your password by yourself. |