display COL status - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1) +--- Forum: KC868-HxB series Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=2) +--- Thread: display COL status (/showthread.php?tid=390)

display COL status - athxp - 08-08-2021 Hello, I was wondering if it was possible to use a small display that warns of the status of the outputs or inputs of COL. in the photo I put a led (far right) that warns me of a condition (lack of pellets in the boiler). but I would like a small lcd or display, maybe settable. is there anything compatible? RE: display COL status - admin - 08-08-2021 how about this panel on the wall? RE: display COL status - athxp - 08-09-2021 it is a bit too much, something finer that integrates into the wall plates. even with less information, 3 or 4 are enough for me. RE: display COL status - admin - 08-09-2021 you can use a 86mm*86mm size HMI , program by yourself to read any state of KC868-COL. RE: display COL status - athxp - 08-09-2021 here, this is interesting. which display can I use and how can I program it? RE: display COL status - admin - 08-09-2021 you can search many HMI device by online store. RE: display COL status - athxp - 03-08-2023 I resume the discussion, as I would like to integrate optical signaling into the house. I would like a small display like this: https://it.aliexpress.com/item/1005003484018034.html?spm=a2g0o.detail.1000060.3.2c6f6812HK4N9F&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.291025.0&scm_id=1007.13339.291025.0&scm-url=1007.13339.291025.0&pvid=494a8b4e-d193-4a00-8274-4c52d2a762ca&_t=gps-id%3ApcDetailBottomMoreThisSeller%2Cscm-url%3A1007.13339.291025.0%2Cpvid%3A494a8b4e-d193-4a00-8274-4c52d2a762ca%2Ctpp_buckets%3A668%232846%238109%231935&pdp_ext_f=%7B%22sku_id%22%3A%2212000025994191964%22%2C%22sceneId%22%3A%223339%22%7D&pdp_npi=3%40dis%21EUR%213.21%212.6%21%21%21%21%21%40211b600816783123724623033e7b24%2112000025994191964%21rec%21IT%21&gatewayAdapt=glo2ita is it possible to connect it directly to COL and display a certain writing for a certain input/output? if yes, how? is there a tutorial? RE: display COL status - admin - 03-08-2023 no, can't directly, it's a IIC bus display, you need to write program code. acutally COL not have a IIC extender. RE: display COL status - athxp - 03-09-2023 is there any small display that COL can control by itself? RE: display COL status - admin - 03-09-2023 if you use home assistant software, you can install it in any android small pad.