temperature sensor - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20) +--- Forum: KC868-A128 (https://www.kincony.com/forum/forumdisplay.php?fid=34) +--- Thread: temperature sensor (/showthread.php?tid=4010) |
temperature sensor - ahmedwizza1 - 12-22-2023 hello engineer I want to know how to connect humidity and temperature sensor to the A128 or kc868 server RE: temperature sensor - admin - 12-23-2023 there are sensor's pin define: Red: DC5V Black:GND Yellow:humidity White:temperature KC868-A128: A1 and A2 is 0-5v dc analog input ports. A3 and A4 is 4-20mA analog input ports. your sensor output signal is 0-5v dc. so your sensor RED and Black connect with 5V power supply. Yellow and White cable connect to A1 or A2 of A128 board. RE: temperature sensor - kkabuu - 11-18-2024 Hello! How and what is the code to integrate a senzor in Home Assistant via MQTT? Where I can found the proper documentation for this? Thank you! RE: temperature sensor - admin - 11-18-2024 see here is MQTT document for KCS v2: https://www.kincony.com/forum/showthread.php?tid=3105 |