+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-M16 / M1 / MB / M30 (https://www.kincony.com/forum/forumdisplay.php?fid=50)
+--- Thread: [Arduino source code for M30]-02 read all energy meter data (/showthread.php?tid=4091)
[Arduino source code for M30]-02 read all energy meter data - admin - 01-05-2024
Code:
#include <ModbusMaster.h>
#include <arduino.h>
#include "HardwareSerial.h"
ModbusMaster node;
HardwareSerial my485Serial(2);
#define CHANNEL 0
String temp="";
void read_485(){
while(my485Serial.available()>0)
{
temp = my485Serial.readString(); //read one data then delete it from buffer
Serial.println(temp);
//delay(100);
}
temp="";
}
void setup() {
// put your setup code here, to run once:
Serial.begin(115200);
my485Serial.begin(115200,SERIAL_8N1,32,33);///rx:32 tx:33
while(my485Serial.read()>0){}
node.begin(1,my485Serial);
}
void loop() {
// put your main code here, to run repeatedly:
//first chip BL0910 address:100 second chip BL0910 address:200 third chip BL0910 address:300 every address have 35 bytes data
if(0 == node.readHoldingRegisters(100,35))
{
Serial.print("register value: ");
for(int i=0;i<35;i++)
{
Serial.print(node.getResponseBuffer(i));
Serial.print(" ");
}
}
Serial.println(" ");
Serial.println("next circle!");
delay(500);
}