+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: "KCS" firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=40)
+--- Thread: I connected temperature sensor. But the relay doesn't work (/showthread.php?tid=4128)
I connected temperature sensor. But the relay doesn't work - harryduck - 01-11-2024
Hi
I connected a DS18B20 temperature sensor. and bind with output1.
I configured if temperature higher than 20'c then output 1 goes high, if temperature lower than 19'c then output1 goes low.
But output1 doesn't move. What I have to do in this situation?
RE: I connected temperature sensor. But the relay doesn't work - admin - 01-11-2024
which board you are using?
what firmware you are using?
what setting you have config?
if you want ask one question, please tell us details.
RE: I connected temperature sensor. But the relay doesn't work - harryduck - 01-12-2024
(01-11-2024, 10:28 AM)admin Wrote: which board you are using?
what firmware you are using?
what setting you have config?
if you want ask one question, please tell us details.
I'm using KC868-A8M controller and KCS V2 firmware.
I set if temperature higher than 20'c, then fan rotated by output 1 relay.
But it doesn't work when temperature higher than 20'c.
(output 1 relay bound with temperature sensor)
I attached picture below
Thank you!
RE: I connected temperature sensor. But the relay doesn't work - admin - 01-12-2024
cancel the pop window, i can't see your "IF" setting.
RE: I connected temperature sensor. But the relay doesn't work - harryduck - 01-12-2024
(01-12-2024, 08:01 AM)admin Wrote: cancel the pop window, i can't see your "IF" setting.
RE: I connected temperature sensor. But the relay doesn't work - admin - 01-12-2024
take a photo of your "SENSOR" setting screen.
RE: I connected temperature sensor. But the relay doesn't work - harryduck - 01-14-2024
(01-12-2024, 10:12 AM)admin Wrote: take a photo of your "SENSOR" setting screen.
RE: I connected temperature sensor. But the relay doesn't work - admin - 01-14-2024
Temperature Threshold set to 0.5
Humidity Threshold set to 1
for a testing
RE: I connected temperature sensor. But the relay doesn't work - harryduck - 01-14-2024
(01-14-2024, 05:42 AM)admin Wrote: Temperature Threshold set to 0.5
Humidity Threshold set to 1
for a testing
It's working!! I really appreciate your help!
Have a nice day ^^
RE: I connected temperature sensor. But the relay doesn't work - admin - 01-14-2024
ok, good.