Sim7600E not working with kc868_A4S - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20) +--- Forum: KC868-A4S (https://www.kincony.com/forum/forumdisplay.php?fid=41) +--- Thread: Sim7600E not working with kc868_A4S (/showthread.php?tid=4234) |
Sim7600E not working with kc868_A4S - hocine86 - 02-05-2024 Hi friend, sim7600E connected with board A4S but not working I can’t send sms or call IFTTT, Do I have to buy a unit tuya for it to work or is there no need for that? RE: Sim7600E not working with kc868_A4S - admin - 02-05-2024 upload your IFTTT 4G setting screen photo at here. RE: Sim7600E not working with kc868_A4S - hocine86 - 02-05-2024 (02-05-2024, 07:33 AM)admin Wrote: upload your IFTTT 4G setting screen photo at here. RE: Sim7600E not working with kc868_A4S - admin - 02-06-2024 1. not need to ENABLE tuya protocol, just disable it. 2. make sure in GSM setting. after you enabled, MUST reboot. or you can POWER OFF->ON of your board. then you can press the right blue button "Phone Test" to test firstly, click make CALL or send SMS whether work well. RE: Sim7600E not working with kc868_A4S - hocine86 - 02-06-2024 (02-06-2024, 12:33 AM)admin Wrote: 1. not need to ENABLE tuya protocol, just disable it. hi friend ok thanks, sim7600e is working, but When I make a call from my phone, I find that the number is busy, and when I send SMS (relay1on) to A4S the LED of relay1 is not on, this means the board A4S is not responding RE: Sim7600E not working with kc868_A4S - admin - 02-07-2024 after created IFTTT command, do you have reboot (power off->on) of your A4S board? RE: Sim7600E not working with kc868_A4S - hocine86 - 02-07-2024 (02-07-2024, 12:19 AM)admin Wrote: after created IFTTT command, do you have reboot (power off->on) of your A4S board? Yes,I reboot (power off->on) my A4S board, now IFTTT command is working the calling only (DI1 is trigger), but SMS (relay1on) not working. RE: Sim7600E not working with kc868_A4S - admin - 02-07-2024 GSM test windows in KCS firmware, you click send SMS button, whether can send out test SMS? RE: Sim7600E not working with kc868_A4S - hocine86 - 02-07-2024 (02-07-2024, 07:12 AM)admin Wrote: GSM test windows in KCS firmware, you click send SMS button, whether can send out test SMS? HI, when I click send SMS test button in GSM test windows in KCS firmware, Displays a message error, but test calls in ranging ok RE: Sim7600E not working with kc868_A4S - admin - 02-08-2024 do you set the SMS serivce number of your SIM card? or can you replace another SIM card for a testing? |