+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-HxB series Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=2)
+--- Thread: KC868-H32x CPU (/showthread.php?tid=4366)
KC868-H32x CPU - v1rtus - 02-17-2024
Hello,
Could you please share what CPU is used for KC868-H32B?
The context is that some time ago I was discussing that I cannot upgrade my controller to latest firmware. It was find out that I have H32 controller with CPU STM32F103 and I was suggested to replace CPU to AT32F403.
Yesterday I replaced the CPU and wanted to flash to it bootloader and firmware, however I cannot found this CPU in STVP software.
Could you please advice with that?
I have found out why I cannot flash it, because I have ATmega CPU. Anyway is it possible to flash kincony bootloader to ATmega?
RE: KC868-H32x CPU - admin - 02-18-2024
new CPU is AT32F403AVGT7, use AT link USB cable to download firmware.
AT link order link: https://www.aliexpress.com/item/3256803150639939.html
RE: KC868-H32x CPU - v1rtus - 02-19-2024
thank you a lot. I will order it.
Could you please share what software I need to use to to donwload the bootloader? Are there any instructions available?
RE: KC868-H32x CPU - admin - 02-19-2024
software download and guide see here: https://www.kincony.com/forum/showthread.php?tid=2656