+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-AP / ADR (https://www.kincony.com/forum/forumdisplay.php?fid=38)
+--- Thread: use of I2C connection (/showthread.php?tid=5024)
use of I2C connection - Gerrit - 03-06-2024
Is it possible to use the white I2C plug on the kc868-ap board. If yes to what gpio numbers are the pins connected?
I would like to use this to connect pushbuttons via a IC bus interface as remotely I do not have enough wires to connect all the wall pushbuttons directly to the inputs of thet board. I use esphome
RE: use of I2C connection - admin - 03-06-2024
IIC SDA:GPIO4
IIC SCL:GPIO16
here is KC868-AP board pins define details: https://www.kincony.com/forum/showthread.php?tid=2475
i2c extender cable not too long.