+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-HxB series Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=2)
+--- Thread: KC868-D16 question (/showthread.php?tid=5286)
KC868-D16 question - blackygego - 03-19-2024
Hi, two question,
1.) Do I use input K1 to control output 1+,1-; input K2 controls output 2+,2-; and so on..I am interested in the following, if I can use the K3 input to control the output 14+,14-?
2.) What is the difference between LED Dimmable Driver 0-10V and LED Dimmable Driver 1-10V?
Thank you very much!
RE: KC868-D16 question - admin - 03-19-2024
1. yes, K1-->output1, K2-->output2, K3-->output3.... K16-->output16. can't use K3 with output14. But if you integrate D16 to home assistant, you can define any Kx work with OUTPUTx.
2. just different range of hardware design. our D16 is output 0-10v, so you chose driver 0-10v is better. if you use 1-10v version, maybe 10% percent of bar on phone app will not avaible.