Lights are not turned on if the dimmer is off button is pressed shortly - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1) +--- Forum: Development (https://www.kincony.com/forum/forumdisplay.php?fid=4) +--- Thread: Lights are not turned on if the dimmer is off button is pressed shortly (/showthread.php?tid=5501)

Lights are not turned on if the dimmer is off button is pressed shortly - iwzr - 04-10-2024 Hi, It seems I am too stupid to use the dimmer KC868-D8 with the firmware version 4.37 Flashing and so one was successful and now I started to test the dimmer keys. I made the settings: - Switcher Workmode: 1 Key - Remember Last State: No (based on your last reply) Connected K1+ with KCOM as a test: Behavior: 1. Long Press on the button => Normal behaviour the dimmer goes up and down as described ✅ 2. If the light is on, then "short press" on the button => Normal behavior the dimmer value goes down to 0 ✅ 3. If the light is off, then "short press" on the button => Faulty behavior the dimmer value does not change at all! ❌ My expectation is the same as in the video https://youtu.be/MdCBQl_y4f8?si=68JOT1UzzXkuaNfm&t=605 which means: "short press" when the lights are off should result in setting the dimmer to 99. Anyone else with this problem? RE: Lights are not turned on if the dimmer is off button is pressed shortly - admin - 04-10-2024 what's your means? i don't understand.  when you "short press" , light not work? i suggest you take a video ,send to whatsapp number: +86-15381188302